Remote-Controlled Tracked Flail Mower

The SASC-800 is an industrial remote-controlled tracked flail mower designed for in-situ grass crushing, heavy-duty flail cutting, and controlled vegetation maintenance on demanding outdoor sites. Its 800 mm working cutting width, flail blade shaft speed of 2,300–2,500 r/min, and ability to shred grass up to 50 mm in diameter make it suitable for dense vegetation and routine land maintenance.

The rubber-track travel system, remote-control drive, flying-debris guard, and compact 1,672 × 897 × 987 mm dimensions support controlled mowing on slopes, embankments, parks, orchards, industrial sites, and other areas where conventional mowing equipment may be difficult to operate.

Core Product Advantages

Heavy-Duty Flail Cutting: An 800 mm cutting width and 2,300–2,500 r/min flail blade shaft are designed for in-situ grass crushing and dense vegetation management. The mower can process grass with a listed diameter of up to 50 mm.

Remote-Controlled Operation: Forward, reverse, left-right steering, flail start/stop, throttle adjustment, lighting, and speed selection can be controlled remotely, helping operators work from a suitable position.

Tracked Terrain Mobility: Industrial rubber tracks provide continuous ground contact for controlled movement on uneven grass, slopes, embankments, and other outdoor surfaces. The listed climbing capability is subject to site conditions and safe operating procedures.

Protected Productivity: A flying-debris guard improves operational protection around the cutting area, while the 417 kg operating weight and compact dimensions provide a stable, maneuverable platform for professional vegetation maintenance.

Application Scenarios and Performance

Roadside Embankments and Sloped Greenbelts

The SASC-800 helps maintain grass along roadside embankments, drainage corridors, landscaped inclines, and similar areas where operator access may be inconvenient. Its rubber-track undercarriage supports controlled movement, while remote operation lets the user maintain a clear view of the machine and cutting area. Suitability should be assessed according to terrain, moisture, obstacles, vegetation, and local safety procedures.

Dense Grass and Overgrown Vegetation

The flail system is designed to crush grass in place rather than requiring separate collection. With an 800 mm working width and a blade-shaft speed of 2,300–2,500 r/min, it supports productive vegetation reduction in overgrown areas and can process the listed grass diameter of up to 50 mm. Actual output depends on vegetation density, moisture, ground conditions, and travel speed.

Parks, Orchards, and Landscape Areas

The compact 1,672 × 897 × 987 mm body is suited to maintenance paths, orchard rows, park grounds, and landscaped spaces. Remote steering and selectable travel speeds help operators position the mower precisely around planting areas, access routes, and other fixed site features.

Industrial Facilities and Utility Corridors

For industrial greenbelts, roadside margins, utility corridors, and other routine maintenance zones, the SASC-800 combines a 417 kg operating weight with tracked mobility for a stable working platform. The flying-debris guard adds a protective layer around the cutting area, while remote control supports operation without requiring the user to walk alongside the mower.

Restricted-Access Outdoor Work

The remote-control interface integrates forward and reverse travel, left-right steering, flail start/stop, throttle adjustment, lighting, and high- or low-speed selection. This makes the machine suitable for vegetation work where visibility, operator positioning, and controlled maneuvering are more important than manual walk-behind operation.

FAQ

Q: What type of machine is the SASC-800?

A: The SASC-800 is a remote-controlled tracked flail mower designed for in-situ grass crushing, heavy-duty flail cutting, and professional vegetation maintenance.

Q: What is the working cutting width?

A: The working cutting width is 800 mm, providing a balance between mowing coverage and maneuverability on outdoor maintenance sites.

Q: What type of vegetation can the SASC-800 process?

A: The supplied specification lists a maximum grass diameter for shredding of up to 50 mm. Actual results depend on vegetation density, moisture, ground conditions, and operating speed.

Q: What is the flail blade shaft speed?

A: The flail blade shaft operates at 2,300–2,500 r/min according to the supplied product parameters.

Q: What functions are available through the remote control?

A: The remote-control system supports forward and reverse travel, left-right steering, flail mowing start/stop, throttle adjustment, lighting, and high- or low-speed selection.

Q: Is the SASC-800 suitable for slopes?

A: The SASC-800 is designed for controlled mowing on inclined terrain and uses rubber tracks for continuous ground contact. Actual suitability depends on the slope, surface firmness, moisture, obstacles, vegetation, and operating method. A site-specific safety assessment should be completed before use.

Q: What protection features are included?

A: The product presentation identifies a flying-debris guard around the cutting area. Operators should still follow the applicable safety procedures and maintain a safe clearance from people, buildings, vehicles, and other objects during operation.

Q: What are the overall dimensions and operating weight?

A: The overall dimensions are 1,672 × 897 × 987 mm, and the overall weight listed in the supplied parameters is 417 kg.

Q: What engine powers the SASC-800?

A: The supplied SASC-800 parameter sheet does not state an engine brand, model, or power rating. The engine specification should be confirmed before publication or quotation.